Table of Contents
Advertisement
1. Seed Router—Determine if the DI-106M is to act as a seed
router. This value depends on the existing network. If there is a
NetWare server providing the network number, select No. If
there is no NetWare server providing the network number,
select Yes.
2. Frame Type—For every frame type that the DI-106M needs to
support, you need to set the corresponding field to Yes. The
frame type(s) selected here must be the same frame type(s) as
the server or client stations on that network. Otherwise, the
devices will not be able to communicate. You can select one or
more of these four frame types:
802.2
802.3
Ethernet II
SNAP
3. IPX Network #—If you selected the DI-106M to act as a seed
router, you need to provide a unique network number to be
90
Novell IPX Configuration
Advertisement
Table of Contents
