Lan-To-Lan Application - D-Link DI-106 Series User Manual

associated with the network that the DI-106M has joined. Keep
in mind that this number must not be used anywhere else on the
entire internetwork.
Once you are finished filling in menu 3.3, press ENTER at the Save
message to save your selections, or press ESC at any time to cancel
your selections.

LAN-to-LAN Application

A typical LAN-to-LAN application is to use the DI-106M to call
from a branch office to headquarters such that all of the stations on
the branch office network have access to the server at the
headquarters, as depicted in the following diagram:
For the branch office, you need to configure a Remote Node in
order to dial out to headquarters.
Novell IPX Configuration 91