Tcp/Ip And Dhcp Ethernet Setup - D-Link DI-106 Series User Manual

TCP/IP and DHCP Ethernet Setup

If you are setting up your network for the first time, read the
chapter entitled Configuring for Internet Access before proceeding.
The chapter contains important information on how to assign IP
addresses for your network.
From menu 3, Ethernet Setup, enter 2 to go to menu 3.2, TCP/IP
and DHCP Ethernet Setup.
1. DHCP—This field determines whether the router will act as a
DHCP (Dynamic Host Configuration Protocol) server. If this
control is set to None, DHCP will not be used. If it is set to
Server, the router will act as a DHCP server, capable of
automatically assigning IP addresses to Windows 95, Windows
NT, and other systems that support the DHCP client. When
DHCP is used, the following four items need to be set.
Do not set this field to Server if there is already a DHCP server
on your network.
Installation 43