Command Interpreter Mode; Call Control - D-Link DI-106 Series User Manual

Command Interpreter Mode

This option allows the user to enter the command interpreter mode.
This mode allows you to diagnose, test, and configure your DI-106
or DI-106M using a specified set of commands. A list of valid
commands can be found by typing help at the command prompt.
For more detailed information, contact D-Link technical support.

Call Control

The DI-106 or DI-106M provides two Call Control Management
functions for the Remote Node and Remote Dial-in User. They are
Budget Management and Blacklist.
The Budget Management function provides budget control for
outgoing calls and a way for users to set a limit on their ISDN
utilization to prevent any accidental usage. It limits the total
outgoing call duration over a period of time for each Remote Node
or Remote Dial-in User (callback only). If the total outgoing call
duration exceeds the set limit, future outgoing calls will not be
made and the current call will be dropped.
The Blacklist function prevents the DI-106 or DI-106M from re-
dialing an unreachable phone number. It is a list of phone numbers,
up to a maximum of 14, to which the router will not make an
outgoing call. If the router tries to dial a phone number and fails a
certain number of times (configurable through menu 24.9.1), the
phone number will be put on the blacklist. The user will have to
enable the number manually again for it to be dialed.
140 System Maintenance