Table of Contents
Advertisement
Once you have completed filling in Edit Comments field, press
ENTER at the message 'Press ENTER to Confirm...' to confirm
your selections, or press ESC at any time to cancel your selections.
The new information will now be displayed in the read-only section
of menu 21, Filter Set Configuration, as shown below:
After you press ENTER, you will be taken to menu 21.1, Filter
Rules Summary, as shown below. The information displayed in this
menu is read-only. From here, you can examine the parameters of
each rule that you have configured for that set. Following are brief
descriptions of the column headings in this menu.
#—Refers to the filter rule number (1-6).
A—Refers to Active. Y means the filter rule is active and N
means the filter rule is inactive.
Type—Refers to the type of filter rule. This can display GEN
for generic, IP for TCP/IP, or IPX for Novell IPX.
Filter Configuration
105
Advertisement
Table of Contents
