Table of Contents
Advertisement
on network number. If you need to specify a route to a single
host, use a subnet mask of 255.255.255.255 in the subnet mask
field to force the network number to be identical to the host ID.
4. IP Subnet Mask—Enter the subnet mask for this destination.
Follow the discussion on IP subnet mask in this chapter.
5. Gateway IP Address—Enter the IP address of the gateway.
The gateway is an immediate neighbor of the DI-106 or
DI-106M that will forward packets to the destination. On the
LAN, the gateway must be a router on the same segment as the
DI-106 or DI-106M; over ISDN, the gateway must be the IP
address of one of the Remote Nodes.
6. The Metric and the Private parameters have the same meaning
as those in the Remote Node Setup.
Once you are finished filling in the menu, press ENTER at the
message 'Press ENTER to Confirm...' to save your selections, or
press ESC at any time to cancel your selections.
86
TCP/IP Configuration
Advertisement
Table of Contents
