Table of Contents
Advertisement
From menu 12, select one of the four possible IPX Static Routes as
shown below:
1. Server Name—In this field, enter in the name that has been
configured for the server. This name must be the exact name
configured in the NetWare server.
2. Network #—This field contains the internal network number of
the remote server which you wish to access. Do not use
00000000 or FFFFFFFF for this field.
3. Node #—This field contains the address of the node on which
the server resides. If you are using a Novell IPX implementation,
this value is 000000000001.
4. Socket #—This field contains the socket number on which the
server will receive service requests. The default for this field is
hex 0451.
5. Type #—This field identifies the type of service the server
provides. The default for this field is hex 0004.
Novell IPX Configuration
95
Advertisement
Table of Contents
