Firmware Upgrade - Crestron UPX-2 Operation Manual

Crestron UPX-2
70 ¥ Universal Presentation Processor: UPX-2
NOTE: Crestron Toolbox compares the time required to send the modified
files against the time required to send the entire project. Crestron Toolbox
will then select the package with the shorter transmission time.
6. Click the button to browse for a new compiled (.vtz) program.
"Open" Window
7. Select a file and click Open. When the "Project" window re-opens click
Send to send the project to the UPX-2.
To verify that the project has been transferred successfully, select Tools |
System Info. The new project information will be displayed in the "System
Info" window.

Firmware Upgrade

To take advantage of all the UPX-2 features, it is important that the unit contains the
latest firmware available. Please check the Crestron website for the latest version of
firmware. Not every product has a firmware upgrade, but as Crestron improves
functions, adds new features, and extends the capabilities of its products, firmware
upgrades are posted. To upgrade the firmware, complete the following steps.
NOTE: UPX-2s with the 512MB compact flash operating system cannot be
upgraded to the 1GB compact flash operating system with the procedures described
in this section. For instructions or upgrading a compact flash operating system, refer
to the latest version of the UPX-2 1GB Memory & Operating System Upgrade
Installation Guide (Doc. 6443).
NOTE: This procedure can only be used for firmware upgrades that are downloaded
from the Crestron website.
1. Verify that the procedure for "Establishing Communications Between the
PC and the UPX-2" that begins on page 59 has been performed.
2. Open Crestron Toolbox, click the System Info icon
UPX-2s address book entry from the drop-down list if it is not already
selected
Universal Presentation Processor
Operations Guide – DOC. 6276B
and select the