Crestron UPX-2 Operation Manual page 47

Universal Presentation Processor
Operations Guide – DOC. 6276B
"Upx Debug Output" Window
NOTE: If the SETUP MENU is not displayed in the center of the screen,
refer to the note on page 26 for instructions on adjusting the display.
Via Crestron Toolbox
1. Establish communication with the UPX-2 as described in "Establishing
Communications Between the PC and the UPX-2" on page 59.
2. Right-click on the device and select Functions | Setup Mode....
"Setup/Calibrate" Window
3. Select Enter Setup Mode. The SETUP MENU will be displayed in the
center of the screen as shown in the following diagram.
NOTE: Select Exit Setup Mode to exit the SETUP MENU.
Crestron UPX-2
Universal Presentation Processor: UPX-2 ¥ 25