Crestron UPX-2 Operation Manual page 93

Universal Presentation Processor
Operations Guide – DOC. 6276B
3. Select Functions | Firmware.
4. The "Firmware" window displays the model and current firmware version.
Click Browse... to find a new firmware file to upload.
"Firmware" Window
5. When the following screen appears, browse to locate the firmware (.csz or
.zip) file. ZIP files may contain release notes that can be viewed by clicking
View... in the "Firmware" window.
Locate Firmware in the "Open" Window
6. Click Open to select the file.
7. The "Firmware" window reopens indicating the new firmware version to be
uploaded. Click Send to transfer the new firmware to the device. Click
Close after the firmware has been transferred.
CAUTION: While performing a firmware update, do not power off the
device unless it is unresponsive for an excessively long period of time (i.e.
greater than 15-20 minutes).
NOTE: UPX-2 firmware can only be downgraded to similar version
numbers (i.e., the first three digits must match). For example, 2.08.009 can
be downgraded to 2.08.006. However, 2.10 cannot be downgraded to 2.09.
NOTE: Touchpanel calibration may be required after a firmware upgrade.
Crestron UPX-2
Universal Presentation Processor: UPX-2 ¥ 71