Power Cord Connection And Switch; Ports, Indicators And Buttons – Front Panel; Pc Card - Crestron UPX-2 Operation Manual

Universal Presentation Processor
100-240V ~ 6.3A
50/60Hz
Hot
GND
Neutral
USB
Operations Guide – DOC. 6276B
AUX COM Connector Pinout
PIN MODE FUNCTION
1 Control Data Carrier Detect
2 Status Receive Data
3 Output Transmit Data
4 Control Data Terminal Ready
5 GND Signal Ground

POWER CORD CONNECTION and SWITCH

A six-foot power cable is included.
The AC input (IEC connector) provides auto switching from 100 to 240 VAC,
50/60 Hz.
The switch turns main power on and off.
Ports, Indicators and Buttons – Front Panel
USB 2.0
The Universal Serial Bus (USB) "A" connector can be used for communication to
the DualTouch Technology touchpanels, storage devices, USB mice and keyboards.
The first release of the UPX-2 does not support DualTouch Technology touchpanels
on this port. Additional functionality/compatibility will be available in future
releases.

PC CARD

Two PCMCIA card slots (A and B) are provided for additional flash memory cards
and wireless Ethernet card (PQI FPC-PC.E and Kingston CF/ADP have been tested).
The UPX-2 supports removable storage devices such as compact flash via PC-Card
or USB interface. When a device is inserted (for example, a PC-Card in the front
ports of the UPX-2), a drive letter is assigned by the UPX-2 for access to that
storage. The first device is assigned the drive letter G.
If the assigned drive letter is for temporary use, no further steps are required.
If one or more devices are added to the UPX-2 for continuous use, ensure they are
connected and then reboot the UPX-2. The assigned drive letters will not change
unless you change the connected devices or reboot without the device(s) connected.
From this point forward, you can connect and disconnect other temporary use
devices without rebooting. This is only a configuration step and not required for
normal use. The device will function even if this step is not performed. However,
this will guarantee the drive assignment letter will remain consistent for long-term
use.
Crestron UPX-2
PIN MODE
6 Control
7 Control
8 Control
9 Control
Universal Presentation Processor: UPX-2 ¥ 17
FUNCTION
Data Set Ready
Request to Send
Clear to Send
Ring Indicator