Crestron UPX-2 Operation Manual page 9

Universal Presentation Processor
Operations Guide – DOC. 6276B
"Security" Window
NOTE: The password is case sensitive.
3. When the "Upx Debug Output" window appears, select Project | Enter
Setup Mode.
"Upx Debug Output" Window
The SETUP MENU will be displayed in the center of the screen.
NOTE: For output displays set to resolutions greater than 800 x 600, the
SETUP MENU may be displayed on the left side of the screen. If this
occurs, the display needs to be adjusted. To adjust the display, select
Display Output from the SETUP MENU and select the Full Screen White
test pattern. Turn off the display's power and turn back on after five
seconds. Press the screen to return to the "Display Output" window and
then press Close to return to the SETUP MENU. The display will be
adjusted and the SETUP MENU will be centered on the display.
Crestron UPX-2
Universal Presentation Processor: UPX-2 ¥ vii