Configuring The Upx-2 - Crestron UPX-2 Operation Manual

Crestron upx-2 universal presentation processor: operations guide

Hide thumbs Also See for UPX-2:

Table of Contents

Universal Presentation Processor

Operations Guide – DOC. 6276B

"Network Device Tree" – Sub-Menu

5. Type a new Net ID and press Enter.

Enter New Net ID

Repeat this procedure for each additional network device requiring a Net ID change.

Crestron Toolbox can also be used to set Net IDs with the SETUP button on the rear

panel. For instructions, refer to the Crestron Toolbox help file.

NOTE: To set the ID using the SETUP MENU, refer to "Cresnet" on page 29.

Configuring the UPX-2

The UPX-2 is configured from the SETUP MENU.

NOTE: If a project has not been loaded, or if an invalid project has been loaded, the

touchpanel displays an error message and defaults to the SETUP MENU screen.

Crestron UPX-2

Universal Presentation Processor: UPX-2 ¥ 23

Table of Contents