Rgb Input A And B - Crestron UPX-2 Operation Manual

Universal Presentation Processor
RGB INPUT
A B
Pin 5
Pin 10
Pin 15
VIDEO INPUT 2
VIDEO INPUT 1/HDTV
B C
A A B
Y C
Y
P
Y P Y P
B R B
Operations Guide – DOC. 6276B

RGB INPUT A and B

Two DB15HD female connectors are provided for RGB (VGA) input.
Pin 1
Pin 6
Input DB15HD Pinout
Pin 11
PIN DESCRIPTION
1 Red video input
2 Green video input
3 Blue video input
4 GND
5 GND
6 GND
7 GND
8 GND
VIDEO INPUT 1/HDTV and VIDEO INPUT 2 (BNC Female)
Six 75Ω BNC connectors allow composite, component or S-video input. You may
C
C
have six composite video inputs, two S-video inputs, two component video inputs,
P
R
or some combination of the three types. Each S-video input requires two BNC
connectors. For example, if you are using two S-video inputs, then there are two
composite video inputs remaining. For additional connector information, refer to
"Hardware Hookup" on page 52.
NOTE: Only two video sources may be displayed simultaneously.
S-video inputs must use the same pair of B (Y) and C (C) BNC connectors.
Each component video connection requires a set of three BNC connectors, Y, P
and P , and must use the same group of A, B, and C connectors. HDTV Component
R
input video can be 480p, 576p, 720p, and 1080i.
Composite video is a type of video signal in which all information – the red, green,
and blue (horizontal and vertical sync) signals are carried over one coaxial cable.
HDTV utilizes all three BNC connectors associated with VIDEO INPUT A, so if
you wish to display one HDTV and another video source simultaneously, the other
video source must be connected to VIDEO INPUT B. This will limit the possible
video sources on VIDEO INPUT B to either three composite sources, or one
S-video and one composite source, or one component source.
S-video contains two separate signals, luminance and chrominance (also known as
Y and C signals respectively). The luminance signal contains brightness, intensity,
and signal timing information. This signal contains all picture information except
for color. The chrominance signal contains only the color information. You can see
the complete black and white image, without the chrominance, by only feeding the
luminance signal into a monitor.
Component video is a method of transferring video information using multiple,
individual signals: luminance (Y), luminance minus blue (PB-Y), and luminance
minus red (PR-Y). Video information is transmitted in individual parts to prevent
errors due to combining and then separating the various parts of the color video
PIN DESCRIPTION
9 Not Connected
10 GND
11 Not Connected
12 DOC Clock
13 Horizontal Sync
14 Vertical Sync
15 DOC Data
Universal Presentation Processor: UPX-2 ¥ 13
Crestron UPX-2
,
B