Crestron UPX-2
viii ¥ Universal Presentation Processor: UPX-2
UPX-2 SETUP MENU
Establish Communications
NOTE: Communications is initially established by serial method. Ethernet
communication is recommended for faster sending. Refer to "Establishing
Communications Between the PC and the UPX-2" on page 59 for detailed
communications information.
NOTE: This procedure requires Crestron Toolbox. The minimum version of
Crestron Toolbox required to operate with the UPX-2 is version 1.2.10 or later. For
more information, refer to "Crestron Toolbox" on page 21.
Serial Communication
1. When the SETUP MENU appears, click the Touch Screen button.
2. In the Use Serial Port For: box, click Console. In the Console Settings box,
select the Baud Rate (115200), select Parity (None), select Data Bits
(Eight), select Stop Bits (One), and enable RTS/CTS. Then click OK.
Universal Presentation Processor
Operations Guide – DOC. 6276B