Ports – Rear Panel - Crestron UPX-2 Operation Manual

Universal Presentation Processor
Physical View - Rear
DO NOT REMOVE
THIS COVER. THESE
PORTS SHOULD NOT
BE USED ON THE UPX-2
Physical Views –Top, Side, and Front
NET
24 Y Z G
Operations Guide – DOC. 6276B
IN
OUT
17.03 in
(43.26 cm)
Ports – Rear Panel
NET
The four-pin 5 mm detachable terminal block provides communication (the UPX-2
does not use power from or supply power to this pin) with a Cresnet control
network. For additional details, refer to "Network Wiring" on page 20.
Pins 24 and G provide 24 VDC and ground.
Pins Y and Z provide communications (data).
NOTE: The UPX-2 does not use, or supply power to the 24 VDC Cresnet
connection.
Crestron UPX-2
12.12 in
11.43 in
(30.78 cm)
(29.03 cm)
3.47 in
(8.81 cm)
Universal Presentation Processor: UPX-2 ¥ 11