Crestron UPX-2 Operation Manual page 59

Universal Presentation Processor
Operations Guide – DOC. 6276B
NOTE: Changes made in the SIMPL windows program override these color
adjustments.
NOTE: When Default is selected, all controls are set to zero.
Calibrate Auto, Default and Manual – Auto calibrate is the preferred setup method
for RGB. Auto calibrate automatically adjusts the input setting every time the source
is selected. It looks at the sync for "front and back porch", and sets them for the
selected input. Auto calibrate is a mode that is set in the "Video Setup" window for
each RGB input. You must select the source and have it displayed before selecting
Auto from the Calibrate area. You can return to this setup screen when you want to
perform auto calibrate in the future.
If this selection does not look correct, select default calibrate, which sets the input
setting to the factory defaults.
Manual calibrate permits you to manually adjust the controls.
NOTE: If you are unable to obtain a stable RGB window using Auto or Default,
perform the manual lock sync adjustment (coarse and fine) before continuing with
the color, size, and position adjustments.
Presets – Up to 30 presets may be stored for future retrieval. Press Store to store the
settings in the preset location displayed. Press Load to load the settings of the preset
location displayed.
When an RGB source is connected, the UPX-2 automatically detects the horizontal
resolution, vertical resolution, and sync frequency of the source. The UPX-2 will
search through all of the presets that are defined for the detected settings. If a
matching preset is found, the preset will be applied to the detected source. The preset
number will be reported to the control system and displayed on the screen. If two or
more presets were found with matching settings, the last-recalled preset will be used
and the preset will be reported to the control system.
If a matching preset is not found, the UPX-2 will automatically calibrate for the RGB
source. These settings will be stored as the last-recalled settings.
If presets have not been stored for a specific input, the last-recalled settings will be
applied to all sources for the input. The preset number "0" will be reported to the
control system and displayed on the screen.
Video Setup
The setup screen for each video source contains the settings as displayed in the
following image. Changes are made in real time.
Crestron UPX-2
Universal Presentation Processor: UPX-2 ¥ 37