Crestron UPX-2 Operation Manual page 89

Universal Presentation Processor
Operations Guide – DOC. 6276B
"Open" Window
4. To enter a new IP ID, select the hexadecimal IP ID of the control system
from the IP ID list. The IP ID of the control system must match the IP ID
that is specified to the control system in the SIMPL Windows program.
"IP Table Entry" Window
NOTE: All IP table entries are set as Master and cannot be changed.
5. In the IP Address/Hostname field, enter the static IP address of the control
system, or if the control system is DHCP-enabled, its fully qualified domain
name. After entering all of the information, click OK to add the entry to the
IP table.
6. Repeat this procedure for all of the control systems that will control the
UPX-2.
7. Click Save To File... on the "IP Table" window to save this IP table to the
PC.
Crestron UPX-2
Universal Presentation Processor: UPX-2 ¥ 67