Rgb Output A And B - Crestron UPX-2 Operation Manual

Crestron UPX-2
COM
Pin 1
Pin 9
RGB OUTPUT
A B
Pin 5
Pin 10
Pin 15
12 ¥ Universal Presentation Processor: UPX-2
NOTE: The UPX-2 is only compatible with 2-Series control systems.
COM
DB9 male connector provides hardware and software handshaking bidirectional
support for RS-232, RS-422, and RS-485. This connector can be used for the touch
out command (Touch the PC application) as well as local serial device control.
COM Connector Pinout
PIN DIRECTION
1 To UPX-2
2 To UPX-2
3 From UPX-2
4 From UPX-2
5
6 To UPX-2
7 From UPX-2
8 To UPX-2
9 From UPX-2

RGB OUTPUT A and B

Two DB15HD female connectors are provided for RGB (VGA) output. The DTT
Pin 1
(DualTouch Technology touchpanel) is connected to RGB OUTPUT A for analog
Pin 6
video. The display device is connected to RGB OUTPUT B.
Pin 11
Output DB15HD Pinout
PIN DESCRIPTION
1 Red video output
2 Green video output
3 Blue video output
4 Not Connected
5 GND
6 GND
7 GND
8 GND
Universal Presentation Processor
(RXD-) RS-422 Receive Data (Idles Low)
(RXD) RS-232 Receive Data
(TXD) RS-232 Transmit Data
(TXD+) RS-422 Transmit Data (Idles High)
GND RS-232 and RS-422 Signal Common
(RXD+) RS-422 Receive Data (Idles High)
(RTS) RS-232 Request to Send
(CTS) RS-232 Clear to Send
(TXD-) RS-422 Transmit Data (Idles Low)
PIN DESCRIPTION
9 Not Connected
10 GND
11 Not Connected
12 Not Connected
13 Horizontal or Composite Sync
14 Vertical Sync
15 Not Connected
DESCRIPTION
Operations Guide – DOC. 6276B