Automatically Configure Devices - Crestron SW-SIMPL Installation & Operating Manual

Crestron SIMPL™ Windows
Importing VisionTools™
VisionTools™
Installation & Operations Guide – DOC. 5728C
To Use AutoFill
To initiate Auto Fill, select Project | Auto Fill Rack.
It is important to remember that AutoFill cannot detect transmitters (IR nor RF) or
one-way RF wireless touchpanels such as the ST-1550 (although it will detect
two-way wireless touchpanels); nor does it detect User Devices. Therefore, after
using AutoFill, make sure to manually configure these kinds of devices in the
Configuration Manager.
NOTE: Your system must first be physically connected to your PC before initiating
AutoFill.
for Windows
Pro-e Projects
Select the touchpanel for which you want to import a VisionTools project. Click the
right mouse button and select Configure.
Select TouchPanel for VisionTools Project
The "Device Settings" dialog box will be displayed. Select the UI Project tab and
click the Browse button to display the VisionTools project files. SIMPL Windows
supports both .prj (VTW) and .vtp (VT Pro-e) files.
Browse for VisionTools Project

and
Crestron SIMPL Windows • 39
Software