Opening Simpl Windows; Set Directory Paths - Crestron SW-SIMPL Installation & Operating Manual

Software

Opening SIMPL Windows

QuickAccess Icon

Set Directory Paths

18 • Crestron SIMPL Windows
Each time SIMPL Windows is opened the "Quick Access Window" appears and
prompts users to select the first task.
Quick Access Window
The window asks you: "What do you want to do?" and presents four options:
1. Run SIMPL Windows Tutorial
2. Create a New Program
3. Open an Existing Program
4. Exit SIMPL Windows
Removing the QuickAccess Window
To remove the QuickAccess window, select the Don't show this at startup box at the bottom
of the window and close the window.
Call Up the QuickAccess Window
Users can call up the QuickAccess window at any time during your program by clicking the
Lightning Bolt icon on the SIMPL Windows button bar, or selecting File | Start.
The install process sets the directory paths, but it is important to make sure the paths
are correct after SIMPL Windows is loaded into your PC.
Crestron SIMPL™ Windows
Installation & Operations Guide – DOC. 5728C