Naming Signals - Crestron SW-SIMPL Installation & Operating Manual

Crestron SIMPL™ Windows
Installation & Operations Guide – DOC. 5728C
Available Commands from a Right Mouse Click on Symbol Library
Placing a Symbol
In Program View, double click on the symbol to display it in Detail View. Once in
Detail View, the symbols signals can have names assigned and, if necessary,
parameters defined.
Double Click Symbol to Display

Naming Signals

Signal names are assigned in Detail View. The signal must be selected or highlighted
before text can be entered. By default, the top input signal (top left) is automatically
selected when a signal is first displayed. Use the pointer or arrow keys to navigate
around the symbol.
Software
Crestron SIMPL Windows • 59