Notice (Cmcvt106); Notice (Cmcvt107) - Crestron SW-SIMPL Installation & Operating Manual

Software
186 • Crestron SIMPL Windows

NOTICE (CMCVT106)

Invalid Escape Sequence "\Q" detected in S-1, Prompt "string".
An escape sequence starts with the \ character. Valid escape sequences are (the
notation \x following the explanations are the character(s) the escape sequence
actually produces).
\a Bell (alert)
\b Backspace
\f Formfeed
\n Newline
\r Carriage Return
\t Horizontal Tab
\v Vertical Tab
\\ Backslash
\xYY Hex constant
A valid hex constant is specified as a \ followed by an X or x followed by two
hexadecimal characters (0-9, A-F). If a hex constant is specified but not completed, a
different error is generated, specific to hexadecimal characters. The error message
that tells you what symbol the error was encountered in (S-1) and the particular
prompt on the symbol where the error occurred ("string").

NOTICE (CMCVT107)

Incomplete escape sequence encountered at end of string in S-2, Prompt
"string".
An escape sequence starts with the \ character. In this case, an escape sequence was
specified with \ as the last character of a string and no further data was typed. Valid
escape sequences are (the notation \x following the explanations are the character(s)
the escape sequence actually produces).
\a Bell (alert)
\b Backspace
\f Formfeed
\n Newline
\r Carriage Return
\t Horizontal Tab
\v Vertical Tab
\\ Backslash
\xYY Hex constant
A valid hex constant is specified as a \ followed by an X or x followed by two
hexadecimal characters (0-9, A-F). If a hex constant is specified but not completed, a
different error is generated, specific to hexadecimal characters. The error message
that tells you what symbol the error was encountered in (S-2) and the particular
prompt on the symbol where the error occurred ("string").
Crestron SIMPL™ Windows
\x08
\x07
\x0C
\x0D\x0A
\x0D
\x09
\x0B
\x5C
\x08
\x07
\x0C
\x0D\x0A
\x0D
\x09
\x0B
\x5C
Installation & Operations Guide – DOC. 5728C