Crestron SW-WMC Installation Manual

Installation/Configuration
Procedures
These procedures assume that the SW-WMC Windows
Media Center Interface Software program has been
downloaded from the Crestron website to the Windows
Media Center. To use the program, it must first be
installed and configured.
Installation
Locate the downloaded program and do the following:
•
Double-click the SW-WMC_Setup.exe icon to
open the SW-WMC InstallShield Wizard.
•
Click Next, and when the "License Agreement"
screen appears (not shown here), click the
"accept" statement, and click Next again.
•
When the SW-WMC Setup Wizard welcome
screen appears, click Next to begin the setup
process.
•
Click Next to go to the "Confirm Installation"
screen.
Crestron Electronics, Inc.
15 Volvo Drive Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
www.crestron.com
Windows Media Center
Interface Software
•
Follow the instructions to identify the folder
where the SW-WMC program is to be installed.
•
Click Next to go to the "Confirm Installation"
screen.
•
Click Next to start the installation. When the
installation is finished, the "Installation
Complete" screen appears. Click Close to end.
•
Configuration instructions are given on the next
page.
Installation & Configuration – DOC. 6500
(2015794)
09.06
Specifications subject to
change without notice.