Begin Testing With Test Manager - Crestron SW-SIMPL Installation & Operating Manual

Software
• Crestron SIMPL Windows
98

Begin Testing with Test Manager

Launch Test Manager from either the button bar or the tools menu.
Test Manger Checking Baud Rates
If Test Manager cannot communicate with the control system, a warning box will
display "No Communications with rack".
No Communication with System
NOTE: The control system always runs the last uploaded version of the program.
Changes made to a program are not reflected by the control system until the new
program is compiled and uploaded.
The Test Manager environment will be displayed. The selected signals (signals with
the Set Watch active) will be displayed in the Status Window.
Crestron SIMPL™ Windows
Installation & Operations Guide – DOC. 5728C