Auto-Increment The Last Number; Auto-Increment The Last Number In A Signal Name - Crestron SW-SIMPL Installation & Operating Manual

Crestron SIMPL™ Windows
Installation & Operations Guide – DOC. 5728C
How to Auto-Increment the First Number
1. Highlight a signal with a name that has a numeric component
2. Move your cursor to the signal below that signal, by pressing the down
arrow once, or clicking the lower signal once
3. Press the SHIFT-F4 key.
A new signal name will appear, identical to the first except for the first numeric,
which will be one increment higher.

Auto-Increment the Last Number

If a given signal name contains two numeric values, such as: CAM1-PRESET1
AutoIncrement Last will automatically generate additional signal names that follow
in sequential order, based on the last numeric.
In the above example, AutoIncrement would generate the following signal names:
CAM1-PRESET2
CAM1-PRESET3
CAM1-PRESET4
CAM1-PRESET5
To use Auto-Increment Last:
1. Highlight a signal with a name that has a numeric component
2. Move your cursor to the signal below that signal, by pressing the down
arrow once, or clicking the lower signal once
3. Press the F4 key.
A new signal name will appear, identical to the first except for the last numeric,
which will be one increment larger.
NOTE: To Auto-Increment both inputs and outputs, it must be done separately. First
increment the inputs, then increment the outputs.

Auto-Increment the Last Number in a Signal Name

If a given signal name contains two numeric values, such as:
CAM1-PRESET1
AutoIncrement Last with Highlight will automatically generate further signal
names that follow in sequential order, based on the last numeric, and will also
highlight the input or output directly below the current signal.
If you wish to AutoIncrement both your inputs and your outputs, you must do so
separately. First increment your inputs, then increment your outputs, or vice-versa.
To use AutoIncrement Last with Highlight
1. Highlight a signal with a name that has a numeric component
2. Move your cursor to the signal below that signal, by pressing the down
arrow once, or clicking the lower signal once
Software
Crestron SIMPL Windows • 83