Starting Network Analyzer; Communication Settings - Crestron SW-SIMPL Installation & Operating Manual

Software
130 • Crestron SIMPL Windows

Starting Network Analyzer

Network Analyzer is started from the Windows Start Menu. Click on
select Programs | Crestron | SIMPL Windows. Locate Network Analyzer in the
SIMPL Windows group of icons and open it by double clicking on it.
Network Analyzer will display an empty window as shown below.
Network Analyzer

Communication Settings

Network Analyzer needs to communicate with the system control processor (rack).
To edit the communication settings select Edit | Communication settings
(alternatively Alt+D). The "Port Settings" dialog box will be displayed. Make the
desired changes and click OK.
Crestron SIMPL™ Windows
Installation & Operations Guide – DOC. 5728C
and