Software
DeletePlus allows you to Delete A
Signal while Highlighting the Input
or Output below it. Hold Ctrl
while pressing the Delete key.
76 • Crestron SIMPL Windows
In Program View
1. Navigate through the Program Tree until you find the signal, or locate it
in the signal List folder at the bottom of the Program Tree.
2. Double-click the signal
3. Make your signal name modifications
4. Press Enter on your keyboard
Rename Signal Globally
SIMPL Windows makes it "simple" to rename signals globally. This changes the
signal name while keeping the connections intact. The signal routings do not change
only the signal name changes.
In Detail View, select the signal that is going to be renamed. Right mouse click to
display the menu and choose Rename Signal Globally. The "Rename Signal" dialog
box is displayed. Enter the new signal name and select OK.
"Rename Signal" Dialog Box
Disconnect a Signal
If the signal to be deleted is connected to multiple symbols in your program, you will
see multiple instances of the signal in Program View, as well as in Detail View if the
symbols that contain it are open. Exercise caution when selecting a signal for
deletion. Make sure you find the exact instance of the signal you want deleted.
In Detail View
The symbol containing the particular instance of the signal to be deleted must be in
Detail View.
1. Check the symbol header to insure you are deleting the exact instance
of the signal.
2. If there are currently multiple symbols present in Detail View, bring the
correct symbol to the front in the view, or maximize the correct symbol
if it is currently minimized.
3. Select the instance of the signal to be deleted and press the DELETE
key.
In Program View
In the Program Tree:
1. Find the specific symbol containing the signal to be deleted.
2. If the symbol is currently collapsed, expand it by selecting the plus (+)
sign.
Crestron SIMPL™ Windows
Installation & Operations Guide –DOC. 5728C