World View - Crestron SW-SIMPL Installation & Operating Manual

Software
48 • Crestron SIMPL Windows
"Enter New Bookmark Name" Window
Enter a bookmark name and select OK. The bookmark will be added. Anytime it is
necessary to return to the Detail View that was displayed when the bookmark was
added, select Bookmark | bookmark name.

World View

Select View | World View to open a World View window. World View provides a
map or overhead view of the current symbols in Detail View. This enables
programmers to move around in Detail View very quickly even if many symbols are
open.
Click on the symbols in the World View window and Detail View will automatically
move to that section of the program. The red box in the World View window
displays what is shown in Detail View. Clicking inside of it and dragging can move
the box.
World View
World View Properties
World View properties are set by selecting Edit | Preferences | General Tab.
Clicking the check box enables the Virtual Workspace. The pages included in the
WorldView can be increased or decreased by providing the desired number to view.
Crestron SIMPL™ Windows
Installation & Operations Guide –DOC. 5728C