Test Manager - Crestron SW-SIMPL Installation & Operating Manual

Crestron SIMPL™ Windows

Test Manager

Installation & Operations Guide – DOC. 5728C
Page
Add/Edit Object
Delete Object
Center Object
File
Ctrl+O Open a SIMPL Windows SMW file or a SIG file
Open
Save Program Ctrl+S NOT IMPLEMENTED AT THIS TIME
Save Incoming Data
Exit
Edit
Copy Ctrl+C Copy Selected Data in the Incoming Data
Clear Incoming Data Ctrl+I
Alt+D
Port Settings
View
Toolbar
Status Bar
Status Window
Add Signal
Add Selected Signals
from Trace Window
Remove Signal
Remove All Signals
Assert Signals
De-Assert Signals
Positive Pulse Signals
Negative Pulse Signals
Save To Disk
Bookmarks
Add New or Edit Existing Object
Delete Selected Object
Center Selected Object
Save All Data in the Incoming Data Window to a
User Specified File
Exit Test Manager
Window to the Clipboard
Clear All Data in the Incoming Data Window
Set the Communications Settings (COM Port,
Baud Rate, etc.)
Toggle to View Toolbar
Toggle to View Status Bar
Brings Up a Dialog to Add Signals to the Status
Window
Adds the Selected Signals to the Status Window
Remove Selected Signals from the Status Window
Remove All Signals from the Status Window
Assert the Selected Signals in the Status Window
De-Assert the Selected Signals in the Status Window
Assert then De-Assert the Selected Signals in the
Status Window
De-Assert then Assert the Selected Signals in the
Status Window
Save Information in the Status Window to a User
Specified File
Saves/Restores the Current Window Positions for
Visual Ease
Crestron SIMPL Windows • 165
Software