Viewport - Crestron SW-SIMPL Installation & Operating Manual

Crestron SIMPL™ Windows

ViewPort

Installation & Operations Guide – DOC. 5728C
File
Save Current Buffer
Exit Alt-X Closes the Serial or Ethernet Port and Exits
Edit
Ctrl+ Copies Selected Data to the Clipboard
Copy
Insert
Shift+ This Command has a Dual Function: It Sends Data Out of
Paste
Insert the Current Serial or Ethernet Port to a Connected Device
and Pastes the Selected Data into the Outgoing Data Buffer
Clear Data Alt+C Clears the Contents of the ViewPort Window
Setup
Auto Baud Search
Local Echo
Display in Hex Mode
CR to CR/LF (Outgoing)
Sound
Destructive Backspace
(Incoming)
Character Mapping...
Font...
Split Window
Setup Sequence Keys
Communications Settings Alt+D Allows Setting of Communication Parameters
Modem Settings...
Communication Presets
Restore Defaults
Saves the Contents of the Outgoing Data or
Incoming Data Buffers
Locates the Rack Using Baud Rates of 57,600
and 300
Alt+L Displays Outgoing Data - If in Local Echo
Mode (LEM), Commands Entered are Sent to
the COM Port, as well as Displayed On
Screen - If not in LEM, then Commands are
only Sent to the COM Port
Alt+H The ViewPort Views the Code Types a Device
is Sending Back - A Device may Send Back
Non-ASCII Characters - Enabling Hex Output
Causes all Data Returned to Appear as a Two-
Digit hex Number - If Hex Output if off, all
Returned is Displayed in Plain ASCII Text
Outputs a Carriage Return with a Line Feed
Enables Sound
Causes Incoming Backspace Characters to
Remove the previous Character from the
Incoming Data Buffer
Brings up the "Character Mapping" Dialog Box
Allows a New Font to be Selected
Alt+W Splits the Viewing Window Between Incoming
Data and Outgoing Data Windows
Creates a Diagnostic Tool for RS-232
Communication and Saves Sets of Strings
Triggered by One Key Stroke
Turns Off the Modem Speaker When Enabled
Allows Setting of Presets for Communication
Parameters
Restores All Setup Screen Settings, Except for
Modem Settings
Crestron SIMPL Windows • 167
Software