Programming Features; Signal Colors - Crestron SW-SIMPL Installation & Operating Manual

Crestron SIMPL™ Windows

Programming Features

Signal Colors

Installation & Operations Guide – DOC. 5728C
Signals are the elements used in your program to interconnect the various device and
logic symbols that comprise your program. Signals can be one of three types: digital,
analog, or serial. In SIMPL Windows the three signal types are color-coded as
follows:
Digital = Blue
Analog = Red
Serial = Green
Other = Black
NOTE: "Other" signals are neither digital nor analog. These black signals may
indicate a combination of signals (e.g. many symbols accept either analog or serial
signals where the combination is shown as a black signal). The signal type is
displayed on the Status Bar when the signal is highlighted.
Example Signal Colors
Software
Crestron SIMPL Windows • 73