Error Log - Crestron SW-SIMPL Installation & Operating Manual

Software
112 • Crestron SIMPL Windows
Program Reset
The Program Reset command restarts the program that is currently stored in
memory. If programs exist both in internal and Compact Flash memory, the program
in Compact Flash will be loaded. Otherwise, the program in internal memory is
loaded.
Use the console command "CFAUTORUN ON/OFF" to control the actions of the
control system when a Compact Flash card is inserted into a running system. If
CFAUTORUN is enabled, when a Compact Flash card is inserted or removed the
system automatically performs a Program Reset and the program in Compact Flash
will run. If CFAUTORUN is disabled, then a Program Reset must be issued to
switch programs.
If programs exist both in internal and Compact Flash memory, the program in
Compact Flash will be loaded. Otherwise, the program in internal memory is loaded.
Control System Reboot
The Control System Reboot command restarts the control system and reloads the
program that is currently stored in memory. If programs exist both in internal and
Compact Flash memory, the program in Compact Flash will be loaded. Otherwise,
the program in internal memory is loaded.
Erase Program
The Erase Program command erases the current program from either internal
memory or Compact Flash.
If the Viewport detects a program in Compact Flash, then click Yes to erase the
program from Compact Flash, or No to erase the program from internal memory.
Click Cancel to cancel the operation.
Erase Web Pages
The Erase Web Pages command deletes all Web pages from the HTML directory of
internal flash or Compact Flash.
If the Viewport detects Web pages in Compact Flash, then click Yes to erase the
Web pages from Compact Flash, or No to erase Web pages from internal memory.
Click Cancel to cancel the operation.

Error Log

The Error Log submenu provides options for retrieving and saving the error
messages that are shown on the front panel of 2 Series control systems when the Msg
button is pressed.
To display the current error messages in Viewport, click Show Error Log. To write
the error messages to the Clipboard, click Copy Error Log to Clipboard. To save
the error messages to a file, click Save Error Log to File. Then browse to the
desired directory, name the file and click Save. Finally, to erase the front panel error
messages, click Clear Error Log.
Crestron SIMPL™ Windows
Installation & Operations Guide – DOC. 5728C