Configure User Devices - Crestron SW-SIMPL Installation & Operating Manual

Software
Network View of CNMSX-PRO (top), Detail System View of CNXIR-8 (bottom)
34 • Crestron SIMPL Windows
Device Settings: Connection Sheet Tab

Configure User Devices

User devices include CD players, VCRs, lighting controls and anything else the end
user interfaces with through the Crestron control system. These are usually the
devices that are being controlled.
Configuring an IR Controlled Device
Example (SONY CPC-303ES CD player)
Once installed, devices will need to be configured. For example, a device such as a
SONY CPC-303ES CD player is controlled with IR signals. The control system
specified for our design is a CNMSX-PRO which has a CNXIR-8 control card
installed from the factory. The CNXIR-8 is an IR card that has eight serial ports
available. Click on the CNXIR-8 to display the eight serial ports in Detail
SystemView.
Select the equipment to be controlled by the IR port A. In this example an IR driver
file for a SONY CCP-303ES CD player is selected from the Crestron Database. The
Crestron SIMPL™ Windows
Installation & Operations Guide – DOC. 5728C