Signal Routing - Crestron SW-SIMPL Installation & Operating Manual

Crestron SIMPL™ Windows
Installation & Operations Guide – DOC. 5728C
NOTE: SIMPL Windows will not allow you to connect a digital input, output, or
signal to an analog input, output or signal, or vice-versa.

Signal Routing

The Signal Routing window displays the specific path between symbols that a signal
takes in a given logic bloc. Every symbol a signal is connected to will appear in these
two fields.
Signal Detail Window
The "Signal Detail" Window can be called up in either Program View or Detail
View:
Select a signal, and press F2.
The window that appears contains two large fields:
•
Driving Sources: This field tells where the selected signal originates.
•
Signal Routing: This field tells where the selected signal is routed
Signal Detail Window
Each line within a field contains the following information, in order:
•
Symbol number, Symbol name, Prompt name, and Symbol comment.
Use the "Signal Detail for" dialog box to locate where a signal is used. Select the
Goto button to locate the symbol(s) for a selected signal. By default, SIMPL
Windows responds by opening the Logic folder in Program View and displaying the
location. If the Always open symbol in Detail View check box is checked, SIMPL
Windows goes one step further and opens the selected symbol (with highlighted
signal) in Detail View. Refer to the example shown after this paragraph.
Software
Crestron SIMPL Windows • 81