Changing Ip Addresses Without Changing The Program - Crestron SW-SIMPL Installation & Operating Manual

Crestron SIMPL™ Windows
Installation & Operations Guide – DOC. 5728C
Select IP.ID and Enter IP Address
Changing IP Addresses without Changing the
Program
When your SIMPL Windows program is compiled, the compiler makes an "IP
Table" consisting of the IP IDs and the IP addresses that were entered in for the
various Ethernet devices added to the program. During upload, you can choose
whether to load this IP table or whether to use the IP table that already exists in the
control system.
Send Default IP Table
You can modify the corresponding IP address for any IP ID without changing or
reloading the program by changing the IP table in the control system directly. From
the ViewPort select Setup IP Table... from the Function menu. Click the Retrieve
Current IP Table from Control System button. This will extract the IP Table from
the CNX system and list it in the dialog box.
Software
Crestron SIMPL Windows • 143