Configure The App's Menu; Configure The App On The Tv - Crestron -APP-SSTV Operations & Installation Manual

Control app for samsung smart tv
Table of Contents

Advertisement

CRESTRON-APP-SSTV
Operations & Installation Guide – DOC. 7594A Control App for Samsung SMART TV: CRESTRON-APP-SSTV • 3

Configure the App's Menu

The app uses an XML file that is stored on the control system to configure the app's
menu. The XML file can be edited to customize the appearance and order of the
app's menus. To edit the XML file, perform the following procedure:
1.
Download the CRESTRON-APP-SSTV example program from
www.crestron.com/exampleprograms.
The example program's .zip file contains the XML file MyProject.xml.
NOTE: Crestron software and any files on the website are for authorized
Crestron dealers and Crestron Service Providers (CSPs) only. New users
must register to obtain access to certain areas of the site (including the FTP
site).
Extract the MyProject.xml file and open it for editing in an XML editor
2.
such as Notepad, Wordpad, or other text editor.
3.
Edit as necessary to present the menu options as desired and save the file
locally.
NOTE: For details on menu configuration and using the XML file, refer to
"Appendix A: Configuration" on page 13, and "Appendix B: XML Text
and Supported Commands" on page 17.
4.
Use Crestron Toolbox™ to upload the XML file to the control system.
a.
Establish communications with the control system as described in the
control system's operations guide.
From the Tools menu, select File Manager.
b.
c.
Place the XML file in the control system's "HTML" folder. For details,
refer to the Crestron Toolbox help file.
5.
Reboot the control system.

Configure the App on the TV

The app must be configured for use with the control system.
NOTE: Additional settings can be specified in the XML file. Refer to "Settings" on
page 15.
1.
Start the app from the SMART Hub by selecting the
starts in Demo mode and is displayed on the TV.
Demo mode is used to demonstrate the capabilities of the application. While
operating in Demo mode, there is no IP communication between the app
and the control system.
Control App for Samsung SMART TV
icon. The app

Advertisement

Table of Contents
loading

Table of Contents