WHEEL INSPECTION/SPOKES INSPECTION AND
TIGHTENING/CABLE INSPECTION AND LUBRICATION
NA2A3016
WHEEL INSPECTION
1.Inspect:
Wheels
Damage/bends → Replace.
NOTE:
Always balance the wheel when a tire or
wheel has been changed or replaced.
WARNING
Never attempt even small repairs to the
wheel.
NB2A3017
SPOKES INSPECTION AND TIGHTENING
1.Inspect:
Spokes 1
Bend/damage → Replace.
Loose spoke → Retighten.
2.Tighten:
Spokes
2 Spoke wrench
NOTE:
Be sure to retighten these spokes before
and after break-in.
Nipple:
3 Nm (0.3 m • kg, 2.2 ft • lb)
CABLE INSPECTION AND LUBRICATION
WARNING
A damaged cable sheath may cause corro-
sion and interfere with the cable move-
ment. An unsafe condition may result, so
replace such a damaged cable as soon as
possible.
3 - 46
CHK
ADJ