ENGINE ASSEMBLY AND ADJUSTMENT
CRANKCASE (RIGHT)
1.Apply:
Sealant
(onto mating surfaces of both case halves)
Quick Gasket
P/N. ACC-11001-05-01
NOTE:
DO NOT ALLOW any sealant to come in
contact with the oil gallery.
2.Install:
Dowel pins 1
3.Fit the left crankcase onto the right case.
Tap lightly on the case with a soft ham-
mer.
4.Tighten:
Bolt (crankcase)
Bolt (crankcase):
10 Nm (1.0 m • kg, 7.2 ft • lb)
5.Apply:
4-stroke engine oil
(to the crank pin, bearing and oil delivery
hole)
6.Check:
Crankshaft and transmission operation
Unsmooth operation → Repair.
SHIFT SHAFT
1.Install:
Circlip 1 (to drive axle)
Collar 2
Circlip 3
4 - 43
ENG
®
: