Table of Contents
Advertisement
STEERING HEAD AND HANDLEBAR
1
6 - 50
9.Remove:
Speedometer assembly 1
10.Remove:
Handlebar crown 1
NOTE:
Loosen the steering stem nut 2 and
remove the handlebar crown 1. Take care
that the handlebar crown does not touch
the fuel tank.
11.Remove:
Lock washer 1
Ring nut 2
Rubber washer
NOTE:
Remove the ring nut 1 by using the ring
nut wrench 2.
Ring nut wrench:
P/N. YU-33975
WARNING
Support the lower bracket so that it may
not fall down.
12.Remove:
Washer
Cover 1
Washer 2
Bearing 3 (upper)
Steering stem 4
CHAS
Advertisement
Table of Contents
