Table of Contents
Advertisement
ENGINE DISASSEMBLY
5.Loosen:
Nut 2 (clutch boss)
NOTE:
Loosen the nut (clutch boss) while holding the
clutch boss with the universal clutch holder
3.
Universal clutch holder:
P/N. YU-91042
6.Remove:
Clutch boss 1
Thrust plate 2
Primary driven gear 3
Ball 4
Push rod 5
7.Straighten:
Lock washer tab 1
8.Loosen:
Nut 2 (crankshaft)
NOTE:
Place a folded rag or aluminum plate
between the teeth of the primary drive
gear and driven gear.
Take care not to damage the gear teeth.
9.Remove:
Lock washer 1
Drive gear 2
Timing chain guide 3
Oil pump gear cover 4
NOTE:
Remove the cover by pulling outward as
shown.
10.Remove:
Oil pump assembly 1
Oil strainer 2
4 - 9
ENG
Advertisement
Table of Contents
