HEADLIGHT BEAM ADJUSTMENT/
HEADLIGHT BULB REPLACEMENT
3 - 56
HEADLIGHT BEAM ADJUSTMENT
1.Adjust:
Headlight beam (vertical)
Turn adjusting screw 1
To raise the
beam
counterclockwise.
Turn adjusting screw 1
To lower the
beam
clockwise.
HEADLIGHT BULB REPLACEMENT
1.Remove:
Cover (headlight)
2.Disconnect:
Headlight leads
WARNING
Keep flammable products and your hands
away from the bulb while it is on, it will be
hot. Do not touch the bulb until it cools
down.
3.Install:
Bulb (new)
CAUTION:
Avoid touching glass part of bulb. Also
keep it free from oil otherwise, transpar-
ency of glass, bulb life and luminous flux
will be adversely affected. If oil gets on
bulb, clean it with a cloth moistened thor-
oughly with alcohol or lacquer thinner.
4.Install:
Bulb cover
Headlight leads
5.Install:
Cover (headlight)
CHK
ADJ