ENGINE DISASSEMBLY
2.Remove:
Generator cover 1
3.Remove:
Starter idle gear 1 1
Shaft 2
Bearing 3
4.Remove:
Crankcase cover 1 (left)
NOTE:
Working in a crisscross pattern, loosen the
bolts 1/4 turn each. Remove them after all
are loosened.
5.Remove:
Starter idle gear 2 1
Push lever assembly 2
6.Remove:
Bolt 1 (rotor)
NOTE:
Loosen the bolt (rotor) while holding the
rotor with the sheave holder 2.
Sheave holder:
P/N. YS-01880
4 - 11
ENG