Table of Contents
Advertisement
ENGINE ASSEMBLY AND ADJUSTMENT
19.Install:
Exhaust pipe 1
Engine stay 2
Nuts (exhaust pipe):
20 Nm (2.0 m • kg, 14 ft • lb)
Bolt (clamp):
20 Nm (2.0 m • kg, 14 ft • lb)
Nuts (stay-frame):
30 Nm (3.0 m • kg, 22 ft • lb)
Nut (stay-engine):
64 Nm (6.4 m • kg, 46 ft • lb)
20.Connect:
Battery negative lead
Refer to "BATTERY INSPECTION" in
CHAPTER 3.
21.Connect:
Carburetor
Air vent hose
Refer to "CARBURETOR" in CHAPTER 5.
22.Install:
Fuel tank
Refer to "SEAT, FUEL TANK AND COV-
ERS" in CHAPTER 3.
23.Fill:
4-stroke engine oil
(in to the crankcase)
Refer to "ENGINE OIL LEVEL INSPEC-
TION" and "ENGINE OIL REPLACEMENT"
in CHAPTER 3.
Oil quantity:
Total amount:
1.45 L (1.28 Imp qt, 1.53 US qt)
Oil check bolt:
7 Nm (0.7 m • kg, 5.1 ft • lb)
CAUTION:
Never start the engine when the oil has
been drained.
4 - 67
ENG
Advertisement
Table of Contents
