Table of Contents
Advertisement
CABLE ROUTING
1 Throttle cable
2 Wire sub lead
3 A.C. magneto lead
4 Front brake hose
5 Handlebar switch lead (right)
6 Clutch switch lead
7 Handlebar switch lead (left)
8 Headlight lead
9 Wireharness
0 Clutch cable
A Air vent hose (right)
B Drain hose
C Breather hose
D Air vent hose (left)
CABLE ROUTING
Å Cut the end of the band after
tightening.
ı Do not put this portion of the
harness on the frame after
connection.
Ç Install the clamp with its
open side facing forward.
Î Install the band, making sure
its end faces backward.
‰ Clamp the front brake hose
between its white mark and
the slot.
Ï Put the handlebar switch
(left) lead on top of the
leads.
2 - 24
SPEC
Ì Pass the spark plug lead over the
leads.
Ó Install the clamp with its end fac-
ing downward.
È Pass the breather hose on the
inside of the leads that run side
by side, but do not clamp it with
a band or other clamping device.
Advertisement
Table of Contents
