Table of Contents
Advertisement
1 Clutch switch lead
2 Clutch cable
3 Handlebar switch (left) lead
4 Handlebar switch (right) lead
5 Front brake hose
6 Throttle cable
7 Taillight lead
CABLE ROUTING
Å The pipe portion of the brake hose should touch the projection
on the master cylinder.
ı Install the brake hose with its white mark facing forward.
Ç Pass the throttle cable 1 to the inside of the throttle cable 2.
Î Pass the handlebar switch (right) lead to the front of the clutch cable.
‰ Do not allow the air ventilation hose to go over the frame.
Ï Pass the air ventilation hose through the guide near the air filter intake.
Ì Install the clamp with its open side facing inward.
Ó Pass the lead under the frame.
È Fasten the wireharness to the guide on the frame with a plastic band.
Ô Pass the wireharness through the guide.
2 - 27
SPEC
Advertisement
Table of Contents
