Yamaha TTR250L Service Manual page 170

ENGINE ASSEMBLY AND ADJUSTMENT
6.Bend:
Lock washer tabs
(along nut flats)
7.Adjust:
Drive chain slack
Refer to "DRIVE CHAIN SLACK ADJUST-
MENT" in CHAPTER 3.
Drive chain slack:
35 ~ 50 mm (1.38 ~ 1.97 in)
8.Install:
Crankcase cover 2 1
Shift pedal 2
Bolt (crankcase cover 2):
10 Nm (1.0 m • kg, 7.2 ft • lb)
Bolt (shift pedal):
10 Nm (1.0 m • kg, 7.2 ft • lb)
9.Install:
Engine guard 1
Bolt (engine guard):
7 Nm (0.7 m • kg, 5.1 ft • lb)
4 - 65
ENG