Table of Contents
Advertisement
STEERING HEAD AND HANDLEBAR
6 - 52
CAUTION:
Always replace bearings and races as a
set.
A slant installation of the bearings and
the races will damage the frame, so take
care to install them horizontally.
Do not strike the rollers.
3.Inspect:
Handlebar crown 1
Lower bracket 2
Cracks/damage → Replace.
Steering shaft 3
Bends/damage → Replace the lower
bracket assembly.
WARNING
Do not attempt to straighten a bent steer-
ing stem as this may dangerously weaken
it.
INSTALLATION
Handlebar
Reverse the "REMOVAL" procedure.
Note the following points.
1.Lubricate:
Handlebar
Lithium soap base grease
NOTE:
Before installing the throttle grip onto the
handlebar, apply a light coat of lithium soap
base grease onto the handlebar end.
CHAS
Advertisement
Table of Contents
