Table of Contents
Advertisement
No.
16
Drive chain
17 * Steering bearings
18 * Chassis fasteners
19
Sidestand
20 * Spark arrester
3
21 * Front fork
22 * Rear shock ab-
sorber assembly
Rear shock ab-
23 *
sorber pivoting
point
*
: Since these items require special tools, data and technical skills, they should be serviced by a Yamaha dealer.
NOTE:
The air filter needs more frequent service if you are riding in unusually wet or dusty areas.
Hydraulic brake system
• When disassembling the master cylinder or caliper cylinder, always replace the brake
fluid. Check the brake fluid level regularly and fill as required.
• Replace the oil seals on the inner parts of the master cylinder and caliper cylinder every
two years.
• Replace the brake hoses every four years, or if cracked or damaged.
PERIODIC MAINTENANCE/LUBRICATION
ITEM
CHECKS AND MAINTENANCE JOBS
• Check chain slack.
• Adjust if necessary. Make sure that the rear wheel is
properly aligned.
• Clean and lubricate.
• Check bearing play and steering for roughness.
• Correct accordingly.
• Lubricate with lithium soap base grease every 1,200 mi
(2,000 km) or 12 months (whichever comes first).
• Make sure that all nuts, bolts and screws are prop-
erly tightened.
• Tighten if necessary.
• Check operation.
• Lubricate and repair if necessary.
• Clean.
• Check operation and for oil leakage.
• Correct accordingly.
• Check operation and shock absorber for oil leakage.
• Replace shock absorber assembly if necessary.
• Check operation.
• Lubricate with molybdenum disulfide grease.
INITIAL
100 mi
(150 km)
1 month
3 - 2
CHK
ADJ
EVERY
600 mi
1,200 mi
(1.000 km)
(2,000 km)
or
or
or
6 months
12 months
Every ride
√
√
√
√
√
√
√
√
√
√
√
√
√
Advertisement
Table of Contents
