Table of Contents
Advertisement
Å
FRONT FORK ADJUSTMENT
3.Check:
Inner tube 1
Scratch/damage → Replace.
Dust seal 2
Oil seal
Excessive oil leakage → Replace.
4.Hold the motorcycle on upright position
and apply the front brake.
5.Check:
Operation
Pump the front fork up and down for sev-
eral times.
Unsmooth operation → Repair.
Refer to "FRONT FORK" in CHAPTER 6.
6.Install:
Fork boots
Band
Refer to "FRONT FORK" in CHAPTER 6.
CAUTION:
Always use a new band.
NB1A1003
FRONT FORK ADJUSTMENT
WARNING
Always adjust each fork to the same set-
ting. Uneven adjustment can cause poor
handling and loss of stability.
Securely support the motorcycle so there
is no danger of it falling over.
Compression damping
1.Adjust:
Compression damping
Turn the adjuster 1 in or out.
Turning in → Compression damping is
harder.
Turning out → Compression damping is
softer.
3 - 39
CHK
ADJ
Advertisement
Table of Contents
